Using a WR schedule to setback lighting at night

[Lijun]

Maurice has written a detailed guide to using schedule, which is very helpful and can be used as a reference.

Simple Schedule Example

The following example is a very simple one to show how to turn a fan on and off according to a schedule. It looks like a lot of steps but there’s explanations and tips along the way, the actual time to do this will be less than a minute once you get up to speed. The first step is to configure the output, click on the controller at Tab1 in the device tree, then click on the outputs at Tab2 to bring up the outputs table grid. At Tab3 we have assigned a short name to output #1, EF101 which is the …

If you want to use schedule to control the output of OUTPUT, you need to set it to AUTO on the SCHEDULE page.

Then in PROGRAM, you can associate the schedule and the output port in the following way, such as the following statement, SCH1 is the first line in the interface, OUT1 is the first OUTPUT port, so that you can switch the OUTPUT according to the task of the time period in SHC1.