T3-Nano: Contemporary BasControl22 connecting to T3-Nano

[Fan_Du]

The links below are for you to use and learn.

Programming for Bacnet and Modbus Subnet devices

Programming for Bacnet and Modbus Subnet devices

Here is an example program showing how to read bacnet and modbus devices wired to the subnetworks of the T3 controller. The two subnets are set up on the RS485 bus connections of the T3 controller, one will have the modbus devices and the other will have the bacnet devices. Note that you cannot mix modbus and bacnet devices on the same subnetwork or you’ll have communications errors. [image] Click on the node at Tab1 and then on the gear icon at Tab2 to bring up the advanced setup screen for t…

https://temcocontrols.com/ftp/software/10SoftwareManual.zip