Accessing T3 Controller from Android Tablet Browser – No App Needed

T3000 Software
1

Here is an example of accessing the WebView system from an Android tablet using only the Chrome browser:

Access Procedure:

  1. Make sure your Android tablet is connected to the same LAN as the controller.
  2. Open the Chrome browser on your tablet.
  3. Enter the local IP address and port of the controller, e.g. http://192.168.0.76:9103/#/
  4. You’ll be taken to the WebView dashboard page as shown below
    image
    image945×506 63.8 KB

Select Device and Graphic:

  1. From the device list, choose the controller or device you want to work with.
  2. Then, from the graphics list, select the graphic you wish to view or edit.
  3. Tap the Confirm button to continue.
    image
    image945×498 37.1 KB

This will load the interactive graphic screen, where you can monitor real-time values, adjust setpoints, and operate equipment directly through the touch interface.

From here, you can follow the steps outlined in this post to continue setting up and customizing your graphics.