Hello Maurice, could I have an updated list of modbus BASIC commands? I found on this forum:
10 REM **** Modbus Function Code 01: Read Coils
20 VAR1 = 3.5.MB_COIL1
30 REM **** Modbus Function Code 02: Read Discrete Inputs
40 VAR2 = 3.5.MB_DISINPUT1
50 REM **** Modbus Function Code 03: Read Holding Registers
60 VAR3 = 3.5.MB_REG1
70 REM **** Modbus Function Code 04: Read Input Registers
80 VAR4 = 3.5.MB_INPUTREG1
90 REM **** Modbus Function Code 05: Write Single Coil
100 3.5.MB_COIL1 = 1
110 REM **** Modbus Function Code 06: Write Single Register
120 3.5.MB_REG1 = 1
Where:
The Panel ID of the T3 controller is 3
And the Modbus ID of the subnet device is 5
Are they still correct? Thanks.