Problem after update the new firmware

Troubleshooting
1

the original firmware is 48.4 , is OK (before upgrade)

But after update the new firmware and clear device
T3-LB-16i seem become self reset about every a few minute
and try to downgrade to 48.4 ,but still reboot every a few minute

i have use ISP-tools to flash below firmware ,
mini_arm_rev50.1_12.2.hex
mini_arm_rev50.1_12.9.hex
mini_arm_rev49.8_10.24.hex
mini_arm_rev48.2_12.3.hex

mark:
thanks for Network Programming Overview
This functionality was added as of Aug 2019 so you may need to update your firmware and T3000 front end.

2

If the T3 is running a program please send that on and we’ll see if we can duplicate the problem. You can also disable the programs one by one and see if there’s any correlation there.